Onye Na-ebunye Ihe Ngwugwu Akpụkpọ E Ji Agba Galvanized Steel Coil (PPGI) Dị Elu nke A Na-ere n'Otu | Agba Pụrụ Iche na Nnyefe Ngwa Ngwa Onye Mmepụta na Onye Na-ebunye Ihe

Onye Na-ebunye Ihe Ngwugwu E Ji Agba Galvanized Steel Coil (PPGI) Dị Elu nke A Na-ese n'Oke | Agba Pụrụ Iche na Nnyefe Ngwa Ngwa

Onye Na-ebunye Ihe Ngwugwu E Ji Agba Galvanized Steel Coil (PPGI) Dị Elu | Agba Pụrụ Iche na Nnyefe Ngwa Ngwa Foto A Na-egosi

Nkọwa Dị Mkpirikpi:

Ọkwa Z80 / Z100 / Z120 / Z275PPGIE ji ígwè galvanized mee ihe nke na-adịgide adịgide, nke dabara adaba maka ịrụ ụlọ, iwu ihe na ọrụ mmepụta ihe.

Agba:RAL 7035, RAL 5015/5017, RAL 9002/9003, RAL 3001/3010, RAL 6005/6011, RAL 1015/1016, RAL 7038, RAL 8017, Emebere ya nke ọma

Ọkọlọtọ:GB/T 2518, EN 10169, ASTM A755/A755M, JIS G 3312

Usoro:A na-akpọgharị oyi

Obosara:600mm-1250mm, 600-1250mm

Ogologo:Ihe Ndị Ahịa Chọrọ, dịka onye ahịa si kwuo

Oge Mbuga ozi:Ụbọchị 3-15 (dịka ọnụego ahụ si dị)

Usoro Ịkwụ Ụgwọ:T/T, LC, Western Union, Paypal, O/A, DP

Ọkwa:DX51D+Z, DX52D+Z, DX53D+Z, SGCC

Zitere anyị ozi-e WhatsApp

Nkọwa Ngwaahịa

Akara Ngwaahịa

Nkọwapụta DX51D–DX53D+Z275 PPGI nke eriri ígwè a kpuchiri agba

ihe	Nkọwapụta	ihe	Nkọwapụta
Ọkọlọtọ	GB/T 2518, EN 10169, ASTM A755/A755M, JIS G 3312	Ngwa	Ụlọ elu ụlọ, ogwe mgbidi, ngwa, ojiji ihe owuwu ụlọ
Ihe ndị dị n'okpuru ala	DX51D+Z, DX52D+Z, DX53D+Z, SGCC	Elu	Mmecha edo dị nro, ezigbo nguzogide nchara
Ọkpụrụkpụ	0.12 – 1.2 mm	Nkwakọ ngwaahịa	Ihe mkpuchi mmiri na-anaghị ekpuchi + eriri ígwè + pallet osisi/ígwè
Obosara	600 - 1500 mm, enwere ike ịhazi ya	Ụdị mkpuchi	Nhọrọ PE, SMP, PVDF
Mkpuchi Zinc	Z80 / Z100 / Z120 / Z275 g/m²	Ọkpụrụkpụ mkpuchi	Ihu 15–25 µm, Azụ 5–15 µm
Ọgwụgwọ Elu	Ọgwụ kemịkalụ tupu e mee ya + agba (dị nro, matte, pearl, mgbochi mkpịsị aka)	Ike siri ike	HB 80–120 (dabere na ihe ndị e ji mee ya na nhazi ya)
Ibu eriri igwe	3–8 tọn, nke a pụrụ ịgbanwe maka njem

Mba.	Ọkwa	Ọkpụrụkpụ. (mm)	Obosara (mm)	Ogologo	Wt. (Ton)	Ngwa
1	DX51D	0.12–0.18	600–1250	Emebere nke ọma	2–5	Ụlọ elu, panel mgbidi
2	DX51D	0.2–0.3	600–1250	Emebere nke ọma	3–6	Ngwa ụlọ, bọọdụ mkpọsa
3	DX51D	0.35–0.5	600–1250	Emebere nke ọma	4–8	Ngwa ọrụ mmepụta ihe, ọkpọkọ
4	DX51D	0.55–0.7	600–1250	Emebere nke ọma	5–10	Ojiji ihe owuwu, elu ụlọ
5	DX52D	0.12–0.25	600–1250	Emebere nke ọma	2–5	Ụlọ elu ụlọ, mgbidi, ngwa
6	DX52D	0.3–0.5	600–1250	Emebere nke ọma	4–8	Ogwe ụlọ ọrụ mmepụta ihe, ọkpọkọ
7	DX52D	0.55–0.7	600–1250	Emebere nke ọma	5–10	Ihe owuwu, ụlọ elu
8	DX53D	0.12–0.25	600–1250	Emebere nke ọma	2–5	Ụlọ elu ụlọ, mgbidi, ihe ịchọ mma
9	DX53D	0.3–0.5	600–1250	Emebere nke ọma	4–8	Ngwa, ngwa ụlọ ọrụ mmepụta ihe.
10	DX53D	0.55–0.7	600–1250	Emebere nke ọma	5–10	Ogwe ihe owuwu, igwe

Ihe ndị e dere:

Enwere ike inye ọkwa ọ bụla (DX51D, DX52D, DX53D) n'ụdị nkọwapụta eriri igwe dị gịrịgịrị, ọkara, na oke.
Ihe atụ aro maka ngwa ndị dabere na ọkpụrụkpụ na ike dabara adaba maka ahịa n'ezie.
Enwere ike ịhazi obosara, ogologo eriri na ibu eriri dịka ihe ụlọ ọrụ mmepụta ihe na njem chọrọ si dị.

Nweta ihe dị mma

PPGI Agba mkpuchi ígwè ahaziri

Nke anyịagba mkpuchi ígwè eriri igwe(PPGI) na-akwado nhazi zuru oke iji dabara na ihe ọrụ pụrụ iche gị chọrọ.

Anyị na-enye ihe ndị e ji eme ihe dị ka DX51D, DX52D, DX53D, tinyere ọkwa ndị ọzọ a na-ejikarị eme ihe mgbe a rịọrọ ya. A na-enweta ibu mkpuchi zinc site na Z275, nke na-enye arụmọrụ dị egwu nke mgbochi ire ere. Ihe e ji mee ihe a nwere ịdị larịị elu na ịdị mma a pụrụ ịtụkwasị obi.

Nkọwapụta dị
Ọkpụrụkpụ: 0.12 – 1.2 mm
Obosara: 600 – 1500 mm (enwere ike ịhazi ya)
Ibu Coil & Ogologo Coil: Na-agbanwe agbanwe ma ahaziri ya iji kwekọọ na nhazi mmepụta na mbupu gị

Ọrụ anyị dị eluIgwe ígwè PPGIjikọta ihe ndị dị ọcha ma na-adọrọ adọrọ. A na-eji ha eme ihe nke ukwuu maka mpempe ụlọ, ihe mkpuchi mgbidi, ihe eji arụ ụlọ, igwe mmepụta ihe na ihe owuwu.

Anyị na-ahazi eriri ígwè kpọmkwem ka ha kwekọọ na ebumnuche ọrụ gị, na-eweta arụmọrụ ka mma, ogologo oge na ịdị mma anya na-adịgide adịgide - na-enyere gị aka ịbawanye uru nke ihe ndị ị ji arụ ọrụ.

Ọkọlọtọ	Ọkwa	Ihe Ndị Dị Mkpa
EN 10346 / EN 10142	DX51D, DX52D, DX53D, DX51D+Z275	Ejiri ihe na-ekpo ọkụ mee ka ọ dị ọkụ, ihe mkpuchi zinc 275 g/m2, ezigbo iguzogide nchara. Maka elu ụlọ, panel mgbidi, ngwa.
GB/T 2518	DX51D, DX52D, DX53D, DX51D+Z275	Ọkwa nkịtị nke obere carbon, mkpuchi zinc 275 g/m2. Ihe owuwu, ụlọ ọrụ mmepụta ihe, ngwa.
ASTM A653 / A792	G90 / G60, Galvalume AZ150	G90 = 275 g/m2 zinc. AZ150 galvalume na-enye ike nchara dị elu. Ụlọ ọrụ mmepụta ihe na azụmahịa.
ASTM A1008 / A1011	CR Steel	Ihe mkpuchi oyi a na-akpọ "cold-rolled" maka ihe ndị dị na PPGI.

Agba	Koodu RAL	Ngwa Ndị A Na-ahụkarị
Ọcha Na-egbuke egbuke	RAL 9003 / 9010	Mmecha dị ọcha nke na-egosipụta ìhè — ngwa, mgbidi ime ụlọ, elu ụlọ
Agba ọcha / Agba aja aja	RAL 1014 / 1015	Ụda dị nro na-anọpụ iche - ụlọ azụmahịa na ebe obibi
Uhie / Mmanya Uhie	RAL 3005 / 3011	Ọdịdị mara mma nke ochie — ụlọ elu ụlọ ọrụ mmepụta ihe, ụlọ mmepụta ihe
Eluigwe acha anụnụ anụnụ / acha anụnụ anụnụ	RAL 5005 / 5015	Ọdịdị nke oge a — ụlọ azụmahịa, ojiji mma
Isi awọ / Isi awọ ọlaọcha	RAL 7001 / 9006	Mmecha ụlọ ọrụ na-anaghị emerụ uzuzu — ụlọ nkwakọba ihe, ụlọ elu, na facades
Akwụkwọ ndụ akwụkwọ ndụ	RAL 6020 / 6021	Ndò na-adịghị ize ndụ gburugburu ebe obibi - ụlọ nchekwa ubi, owuwu dị n'èzí

Ngwa Isi

PPGI ígwè eriri igweA na-ejikarị ya eme ihe n'ọhịa nke nnukwu ụlọ ọrụ mmepụta ihe, ụlọ nkwakọba ihe, ụlọ ọrụ ọfịs, ụlọ elu, ụlọ nhicha ikuku, friji, ụlọ ahịa.

1. Ịrụ Ụlọ
Mgbidi elu ụlọ na ihe mkpuchi kọbọd, ihe mkpuchi mgbidi, ọnụ ụzọ, windo na ihe mkpuchi maka ụlọ ọrụ mmepụta ihe, ụlọ nkwakọba ihe, ụlọ azụmahịa na ebe obibi.

2. Mmepụta Ngwa Ụlọ
Ihe mkpuchi maka friji, igwe ịsa ákwà, ntụ oyi; akụkụ kichin gụnyere ihe mkpuchi ọkụ na panel kabinet.

3. Ụgbọ njem
Igbe ndị e ji arụ ọrụ, ebe a na-edebe ụgbọala, ebe a na-edebe bọs na bọọdụ ndị dị n'èzí, nwere ezigbo mgbochi ihu igwe na nchara.

4. Mmepụta ụlọ ọrụ mmepụta ihe
Nchedo elu maka sistemu ọkpọkọ; imepụta ụlọ na mkpuchi maka igwe mmepụta ihe.

5. Ngwa na ịchọ mma ụlọ
Ụlọ elu, ihe mkpuchi nkewa, kabọd ígwè na kabọd nchekwa maka ịchọ mma azụmahịa na nke ụlọ.

Ihe ndetu:

1. Nnwale efu, nkwa mma 100% mgbe ire ere gasịrị, Kwado usoro ịkwụ ụgwọ ọ bụla;

2. Nkọwapụta ndị ọzọ niile gbasara PPGI dị dịka gị si dị

ihe achọrọ (OEM na ODM)! Ọnụ ahịa ụlọ ọrụ ị ga-enweta site na ROYAL GROUP.

Usoro mmepụta

Nke mbụ nadecoiler -- igwe ịkwa akwa, igwe mpịachi, igwe nrụgide, soda-sash degreasing -- nhicha, ihicha passivation -- na mmalite nke nkụ -- metụrụ aka -- nkụ mbụ --emecha nke ọma tu --emecha nkụ -- ...

Nkwakọba na Ụgbọ njem

Nkwakọ ngwaahịa na-abụkarị site na ngwugwu ígwè na ngwugwu mmiri na-adịghị agbaze, eriri ígwè na-ejikọ, siri ike nke ukwuu.

Ọ bụrụ na ị nwere ihe pụrụ iche achọrọ, ị nwere ike iji ihe mkpuchi nchara na-egbochi nchara, ma mara mma karịa.

Njem:Nnyefe Ngwa Ngwa (Nnyefe Ihe Nlereanya), Ikuku, Ụgbọ okporo ígwè, Ala, Mbupu Oké Osimiri (FCL ma ọ bụ LCL ma ọ bụ Nnukwu)

Ajụjụ Ndị A Na-ajụkarị

1. Kedu ibu mkpuchi zinc ka m kwesịrị ịhọrọ?
A na-atụ aro Z80–Z120 maka ime ụlọ. Họrọ Z180–Z275 maka ikpughe n'èzí ma ọ bụ gburugburu ebe na-emebi emebi.

2. Enwere ike ịhazi nha na agba nke nha na agba?
N'ezie. Anyị na-enye ọkpụrụkpụ, obosara na agba RAL niile a na-ejikarị eme ihe.
Kesaa nkọwapụta gị, anyị ga-eweghachi ọnụahịa n'ime awa iri na abụọ.

3. Oge ole ka ị na-ebu ụzọ?
Ngwa ahịa: ụbọchị 7–15. Oge mbu maka iwu omenala na-agbanwe dịka olu iwu si dị.

4. Kedu ka ị si ekwe nkwa ịdị mma nke ngwaahịa?
Anyị na-enye Asambodo Nnwale Mill (MTC), na-etinye QC siri ike n'ime ụlọ, ma na-anabata nyocha nke ndị ọzọ.

5. Kedu otu esi enweta ọnụahịa kachasị asọmpi gị?
Ọnụahịa na-adabere na nkọwapụta, ihe achọrọ maka mkpuchi na ọnụọgụ nke iwu.
Zipu ihe ị chọrọ iji nata onyinye ụlọ ọrụ mmepụta ihe anyị kpọmkwem.